Whiteside · Rabbets and slot cutters
Whiteside 1901 half-inch cutting-length rabbet bit
1/2 in
When to choose it
The 1901 makes an edge recess with a listed 3/8-inch radial depth and a half-inch axial cutting section. It fits a back-panel or overlapping joint design when those are the two dimensions you need.
Compare it with the thinner 1914 slotting profile if the axial cut should be only 1/4 inch. Both list a 3/8-inch radial depth with their stated bearing arrangement.
Specifications
- Brand
- Whiteside
- Cutting profile
- Rabbet or slot
- Model
- 1901
- Shank
- 1/2 in
- Large diameter
- 1-1/4 in
- Cut length
- 1/2 in
- Radial cut depth
- 3/8 in
- Bearing
- B3
- Amazon.com reference
- B000A81JN4
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
What depth does the B3 setup provide?
The listing specifies a 3/8-inch radial cut depth.
Which dimension is half an inch?
Both the shank and axial cutting length are half an inch on this model.
Will a smaller bearing shorten the cutting section?
Bearing changes affect radial depth on a supported configuration. The cutter length remains fixed.
