Wood Router Bits

Department

Flush trim and template bits

Identify the template side, then compare bearing position, diameter and cutter length.

18 items

Freud

Freud 50-509 top and bottom bearing flush trim bit

Shank: 1/2 inCut and bearing diameter: 3/4 in

The 50-509 can follow a reference surface on either end of its straight carbide section.

$43.33Nov 8, 26, 11:30 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-118 tall shank-side bearing trim bit

Shank: 1/2 inCutter and bearing diameter: 3/4 in

The 50-118 suits taller template-guided cuts when the reference is on the shank side.

$38.96Nov 8, 26, 11:31 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-501 dual-bearing flush trim bit

Shank: 1/4 inCut and bearing diameter: 1/2 in

The 50-501 suits a 1/4-inch collet when you need a flush trim bit that can follow a reference at either end of the cutter.

$28.17Nov 8, 26, 11:31 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside UDFT2100 compression flush trim spiral

Shank: 1/4 inCut diameter: 1/4 in

The UDFT2100 combines opposing spiral directions with a pilot at the tip for template-guided flush trimming.

$71.02Nov 8, 26, 11:32 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-103 5/8-inch shank-side bearing trim bit

Shank: 1/4 inCutter and bearing diameter: 5/8 in

The 50-103 uses a bearing next to its shank to follow a template at that end of the cutter.

$24.99Nov 8, 26, 11:33 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-098 oversized-bearing template bit

Shank: 1/4 inCut diameter: 5/16 in

The 50-098 uses a half-inch guide bearing and a smaller 5/16-inch cutter.

$24.71Nov 8, 26, 11:34 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 42-116 2-inch flush trim bit

Shank: 1/2 inCut diameter: 1/2 in

Choose the 42-116 for tall flush trimming when the template can contact the bearing at the cutter tip.

$41.40Nov 8, 26, 11:35 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside 3004 shank-side bearing template bit

Shank: 1/4 inCut diameter: 1/2 in

The 3004 uses a shank-side guide for a template that sits on that end of the work.

$31.10Nov 8, 26, 11:36 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside 2501 three-flute flush trim bit

Shank: 1/4 inCut diameter: 1/2 in

The 2501 suits shallow flush trimming when a tip-mounted guide can follow the reference edge.

$27.64Nov 8, 26, 11:36 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-106 3/4-inch shank-side trim bit

Shank: 1/4 inCut and bearing diameter: 3/4 in

The 50-106 uses a three-quarter-inch bearing next to the shank to guide a matching diameter cutter.

$33.29Nov 8, 26, 11:37 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 48-102 flush trim V-groove bit

Shank: 1/4 inLarge diameter: 5/8 in

The 48-102 combines edge trimming with a small V detail.

$27.16Nov 8, 26, 11:37 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside 2408 2-inch flush trim bit

Shank: 1/2 inCut diameter: 1/2 in

The 2408 gives two inches of cutting length for taller material when a tip guide can follow the reference.

$31.89Nov 8, 26, 11:38 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside 3002 3/4-inch cutting-length template bit

Shank: 1/4 inCut diameter: 1/2 in

Choose the 3002 when your template sits at the shank end and a three-quarter-inch cutting section is sufficient.

$30.19Nov 8, 26, 11:42 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-112 1-inch shank-side trim bit

Shank: 1/2 inCut and bearing diameter: 1 in

The 50-112 uses a one-inch cutter and matching shank-side bearing.

$28.78Nov 8, 26, 11:42 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside 2402 1-inch flush trim bit

Shank: 1/4 inCut diameter: 1/2 in

The 2402 gives a one-inch cutting section for flush trimming where the tip can follow the reference.

$21.73Nov 8, 26, 11:42 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 42-104 1/2-inch bearing flush trim bit

Shank: 1/4 inCutter and bearing diameter: 1/2 in

The 42-104 uses a matching half-inch cutter and tip bearing to copy an edge.

$14.25Nov 8, 26, 11:43 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Whiteside

Whiteside RFTD2100 downcut flush trim spiral

Shank: 1/4 inCut diameter: 1/4 in

The RFTD2100 combines a narrow quarter-inch spiral cutter with a tip guide for flush trimming.

$58.85Nov 8, 26, 11:44 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Freud

Freud 50-102 1/2-inch shank-side template bit

Shank: 1/4 inCutter and bearing diameter: 1/2 in

The 50-102 follows a template next to the shank.

$22.38Nov 8, 26, 11:44 AM · New York
Price info

This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Add to cart Opens Amazon. Order and pay there.

Choosing flush trim and template bits

Start at the reference surface

A pilot bearing rides against a reference edge. Determine whether the template will be on the shank side or the tip side of the cut before choosing between the two pilot positions.

Check inside corners and cut height

A larger diameter needs more space inside a curve. Compare the cutter’s diameter and useful cutting length with the actual stock and template rather than relying on overall tool length.

Compare these selections

Department questions

Where is a top bearing?

Many listings use top bearing for the bearing at the shank end. Check the exact drawing or source photo for its position.

What does double bearing mean?

It may mean two bearings at one tip or a bearing at each end. The exact drawing tells you which reference sides the bit can use.

Can a flush trim bit make a square inside corner?

A round cutter leaves a radius. Check the smallest inside radius your project can accept.

Buying guides

Back to products ↑