Freud · Flush trim and template bits
Freud 42-104 1/2-inch bearing flush trim bit
1/4 in
When to choose it
The 42-104 uses a matching half-inch cutter and tip bearing to copy an edge. It is suitable when the reference can sit at the far end of the one-inch cutting section.
The 50-102 puts a matching-diameter guide near the shank. Compare where the reference sits in your setup before choosing between the two similar cutter sizes.
Specifications
- Brand
- Freud
- Cutting profile
- Bearing-guided trim
- Model
- 42-104
- Shank
- 1/4 in
- Cutter and bearing diameter
- 1/2 in
- Carbide height
- 1 in
- Overall length
- 2-13/16 in
- Cutters
- Two
- Amazon.com reference
- B0000225Y9
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
Is the bearing at the shank end?
The guide is at the cutter tip.
What is the cutting height?
The carbide section is one inch.
Which collet is specified?
The 42-104 uses a quarter-inch shank.
