Freud · Flush trim and template bits
Freud 50-118 tall shank-side bearing trim bit
1/2 in
When to choose it
The 50-118 suits taller template-guided cuts when the reference is on the shank side. Its 1-3/4-inch carbide section and 3/4-inch nominal cutter diameter address height and inside curve clearance separately.
If your reference must sit at the opposite end, compare a dual-ended design such as the 50-509. Check that the exact height and bearing position both suit the planned cut.
Specifications
- Brand
- Freud
- Cutting profile
- Bearing-guided trim
- Model
- 50-118
- Shank
- 1/2 in
- Cutter and bearing diameter
- 3/4 in
- Carbide height
- 1-3/4 in
- Overall length
- 3-1/2 in
- Amazon.com reference
- B002IPHGAW
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
What side does the guide follow?
The guide sits next to the shank, as shown in the listing photo.
Does the cutter have a second bearing at the tip?
The photo shows one guide bearing at the shank end.
What cut height is documented?
The manufacturer’s catalog lists a 1-3/4-inch carbide height.
