Freud · Flush trim and template bits
Freud 42-116 2-inch flush trim bit
1/2 in
When to choose it
Choose the 42-116 for tall flush trimming when the template can contact the bearing at the cutter tip. The two-inch cutting height covers a taller section than many laminate trim bits.
Measure the reference and material together and check the manufacturer’s limits for a cutter of this length. A shorter bit may suit thin stock with less projection from the collet.
Specifications
- Brand
- Freud
- Cutting profile
- Bearing-guided trim
- Model
- 42-116
- Shank
- 1/2 in
- Cut diameter
- 1/2 in
- Cut height
- 2 in
- Cutters
- Two
- Guide
- Tip bearing
- Amazon.com reference
- B0000225YD
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
Where does the guide sit?
The bearing is at the tip, opposite the shank.
What does two inches describe?
It is the cutting height. The diameter is half an inch.
Does it fit a quarter-inch collet?
The 42-116 requires a half-inch collet.
