Freud · Flush trim and template bits
Freud 50-106 3/4-inch shank-side trim bit
1/4 in
When to choose it
The 50-106 uses a three-quarter-inch bearing next to the shank to guide a matching diameter cutter. Choose it for a shank-side template when the one-inch cutting height suits the stock.
Compare the smaller 50-103 if the project has tighter inside curves or needs a shorter cutting section. Both take a quarter-inch collet but leave different inside clearances.
Specifications
- Brand
- Freud
- Cutting profile
- Bearing-guided trim
- Model
- 50-106
- Shank
- 1/4 in
- Cut and bearing diameter
- 3/4 in
- Carbide height
- 1 in
- Overall length
- 2-5/8 in
- Cutters
- Two
- Amazon.com reference
- B00004T7J1
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
Where is the bearing?
The guide is at the shank side.
How high is the cutting section?
Freud lists one inch of carbide height.
Is the nominal cut offset from the bearing?
Both the bearing and cutter are listed at 3/4 inch for nominal flush trimming.
