Whiteside · Rabbets and slot cutters
Whiteside 1908 5/32-inch slotting bit
1/4 in
When to choose it
The 1908 makes a narrow 5/32-inch cut along the bit axis and reaches a listed half inch into the edge. Those dimensions suit different decisions when fitting a spline or planning an edge slot.
Check the full 1-1/2-inch tool diameter for clearance. Compare the 1914 when you need a wider slot and can use a half-inch shank, or choose by the measured spline before settling on either cutter.
Specifications
- Brand
- Whiteside
- Cutting profile
- Rabbet or slot
- Model
- 1908
- Shank
- 1/4 in
- Large diameter
- 1-1/2 in
- Cut length
- 5/32 in
- Radial cut depth
- 1/2 in
- Overall length
- 1-3/4 in
- Bearing
- B3
- Amazon.com reference
- B000K2AE7C
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
What is the slot width?
The axial cutting length is 5/32 inch.
Does the half-inch measurement describe the shank?
It describes radial depth. The 1908 has a 1/4-inch shank.
What guides the cut?
The listing specifies a B3 bearing. Verify the bearing arrangement before depending on the published depth.
