Whiteside · Rabbets and slot cutters
Whiteside 1959 3/4-inch-depth rabbet bit
1/2 in
When to choose it
The 1959 provides a wide edge recess where the listed 3/4-inch radial depth suits the joint and the work can use the one-inch cutting section. It takes a half-inch collet.
Check clearance for the 1-7/8-inch body and the exact B2 bearing before using the listed depth. Compare a shallower model such as the 1901 if the edge needs only a 3/8-inch overlap.
Specifications
- Brand
- Whiteside
- Cutting profile
- Rabbet or slot
- Model
- 1959
- Shank
- 1/2 in
- Large diameter
- 1-7/8 in
- Cut length
- 1 in
- Radial cut depth
- 3/4 in
- Bearing
- B2
- Amazon.com reference
- B0012JEVZI
Care and other choices
Questions about this product
What depth does the listing give?
The B2 configuration is specified for a 3/4-inch radial depth.
Is the cutting section the same length as the radial depth?
The cutting section is one inch along the bit axis.
What shank does it use?
The shank is half an inch.
