Yonico · Rabbets and slot cutters
Yonico 14908Q 1/16-inch top-bearing slot cutter
1/4 in
When to choose it
The 14908Q cuts a thin 1/16-inch slot with a listed 3/8-inch radial depth. Its guide sits near the shank, so confirm that the reference surface is on that side of the cutting disk.
Compare it with the 12901Q when the same narrow slot needs a different guide placement or a deeper listed cut. Measure the spline independently from the edge overlap.
Specifications
- Brand
- Yonico
- Cutting profile
- Rabbet or slot
- Model
- 14908Q
- Shank
- 1/4 in
- Slot width
- 1/16 in
- Radial cut depth
- 3/8 in
- Large diameter
- 1-1/4 in
- Guide
- Shank-side bearing
- Amazon.com reference
- B0DBMGLC42
Care and other choices
Questions about this product
Is 3/8 inch the slot width?
It is radial depth. The nominal axial slot width is 1/16 inch.
Which side carries the guide?
The image shows the bearing between the cutter and the shank.
Does it use a half-inch collet?
The listed shank is quarter inch.
