Whiteside · Roundovers, chamfers and edge profiles
Whiteside 2000C 1/8-inch roundover bit
1/4 in
When to choose it
The 2000C puts a small radius on a square edge. Choose it when you want the profile to remain visually narrow, such as on a shallow lip or a slim frame where a broad roundover would take up more of the face.
The 3/4-inch diameter is the large body dimension. Check 1/4-inch collet fit separately and compare the 1/8-inch radius with the edge on your sample.
Specifications
- Brand
- Whiteside
- Cutting profile
- Roundover
- Model
- 2000C
- Shank
- 1/4 in
- Profile radius
- 1/8 in
- Large diameter
- 3/4 in
- Cut length
- 1/2 in
- Amazon.com reference
- B000MQKVM4
Care and other choices
Review the cutter dimensions and collet fit ↑
Compare options in this department ↗
Documentation
Questions about this product
Which number controls the shape of the edge?
The profile radius is 1/8 inch.
Will it match a 1/2-inch roundover?
It makes a substantially smaller radius. Compare the 2004 if you need a 1/2-inch radius with a 1/4-inch shank.
What guides it?
The bearing shown at the tip follows the reference edge.
